IKO deep groove ball bearing compressive strength of the impact on the performance

Compressive strength refers to carry a one-way load without being crushed or size doesn't change. How to ensure the deep groove ball bearings in normal use process, how to make the IKO bearing no damage to the bearing life is longer. Here by me to explain for everybody about advertent items to ensure reliable bearing work, I hope will be helpful to you. In general, reliable guarantee deep groove ball bearings work pay attention to matters have the following requirements: 1, deep groove ball bearing clearance should be appropriate, too big impact, poor lubrication is too small, may burn. 2, improve the quality of lubrication, control oil pressure, temperature and flow rate, strengthen the oil filtration. 3, deep groove ball bearing and shaft neck surface quality and geometry shape must be strictly guaranteed. 4, adopt appropriate designation of fuel and lubricating oil. 5, control the temperature of the diesel engine state, in the case of overheating too cold work will be unfavourable. Cold day, should be preheated before starting of diesel engine, with the hand rolling crankshaft oil into friction surface. The influence of the purity of the bearing to the bearing life is quite large, IKO bearing company has the specialized test, the result is the difference for several times or even dozens of times. The higher the purity of the bearing, the longer the life and others test showed that different cleanliness of lubricating oil had a great influence on the ball bearing life. So, to improve the purity of the lubricating oil can prolong bearing's life, in addition, if the lubricating oil containing dirt particles control under 10 um, IKO bearing life is growing into 7 times. Affect the performance of lubrication IKO bearing cleanliness, not only affect the formation of lubricating film, still can cause the deterioration of the grease and accelerate its ageing, thus affecting the grease lubrication performance degradation.