What is the purpose of bearing lubrication needs

High temperature bearing enterprises need lubrication for what is the purpose and necessity of smoothness smooth since the high temperature bearing refers to smooth the antifriction performance of oil. Smooth oil additive is added in the smooth oil is the concept of one or more compounds, make its have new performance, or to improve the smooth oil already in some of the performance. According to the role of food additives research mainly can be divided into antioxidants and metal recovery agent, extreme pressure antiwear agent and friction modifier ( Also known as agent) , clean dispersant, foam dampening agent, anti-rust agent, antioxidant, preservative, active point improver, viscosity index improver, emulsion type anti-wear agent, etc. On the market the company sales of additives for ordinary students are through the method of the single additive compound, different development is is part of a single additive is different, several ways of a single additive proportion in the composite additive is also different. Smooth when the initiator at run time, if some friction components cannot be properly smooth, dry friction occurs. Theory has been proved that in a short period of time the heat generated by the dry friction is enough to make metal condensation, paste parts damage and even death The main reason is that such) 。 Therefore, the initiator of the friction parts must be smooth and well. Lubricating oil flow friction parts, attach to form oil film on the friction surface, reduce the resistance between the friction parts, oil film strength and toughness is the key to the smooth play a role. But the dosage cannot too big, square relationship caused by the amount of resistance, the influence of the speed is very big, so it is important to pay special attention to the dosage. Cooling the heat generated by the engine oil out only a small part of the used in power output, frictional consumption and auxiliary mechanism drive. Most of the other heat, in addition to the released into the atmosphere through the vent, has also been cooling medium away from the engine. Waste heat in the engine must be released from the engine, or because the temperature is too high, starting time will run out. This is done through the engine cooling system, on the one hand, through the lubricating oil, lubricating oil from the cylinder, piston, crankshaft, and other surface absorbs heat to the oil pan, on the other hand. Rust left since the smooth high temperature bearing manufacturer refers to motivation in the operation or storage, and smooth the air in the fuel oil, water and put out his grasp of acidic gas between parts of the enterprise to form a corrosion and corrosion, which can increase the trade friction surface damage. Made of smooth oil oil film machine appearance, can prevent the gas through a direct result of contact with water and acid conditions, avoid corrosion and corrosion. When washing by machine work requires much less dust. Such as sand, dust, brought by the inhalation of air mixed gas and put out after the form of carbon deposit, smooth oil oxidation after forming glue, friction between metal and so on. The life sewage attach to the machine of friction for appearance, if do not flush time down, will increase the wear and tear of a machine. In addition, a lot of glue can make the piston ring binder stuck, cause enterprise launched machine can not meet the normal business operation. Therefore, it is necessary to dirt can timely payment and settlement. The data cleaning process is a cycle of oil in the body can do. A: what is the common quality problems of bearing parts? The next article: no