What are the problems need pay attention to right use of imported bearings

In the process of using imported bearing, and many times in different degree of loss, so we will come today to introduce some methods of prolonging the service life of the imported bearing, so you can better use the imported bearings. The hope can have the certain help to you. Imported bearing installation is correct, affects the precision, life and performance. Therefore, the design and installation of assembly department for imported bearing to fully research. During the period of using, often on imported bearing running basic external condition monitoring, such as temperature, vibration and noise measurement, etc. These regular check will help identify potential problems and to prevent unexpected machine to suspend the phenomenon, make the production plan, improve plant productivity and efficiency. ( 1) Note with sealed import bearings do not clean with this law, sealed inside should stick to the same cleaning. ( 2) Assembly shall be appearance with a clean gasoline, kerosene, toluene and xylene solution clean, and to wipe them with clean cloth, and then coated with a thin layer of smooth oil, which can make the device to operate bento efficiency. ( 3) Open while facing the device imported bearing encapsulation, put it into the liquids such as gasoline with handle gently gently turning, to ensure that insist on frame, rolling element and raceway appearance of encapsulated oil be cleaned completely. ( 4) When cleaning a lot of bearing, with the first temperature is 90 ~ 100 ℃ heat oil pour hot oil to make packaging condensation, at the same time with seamless all mouth and no net exfoliation tools to dig the old oil, then pour hot a few minutes, then rinse with kerosene oil, clean with gasoline again finally. After clean, on film gloves should be worn to import bearings on the worktable of dry clean cloth or paper.