Simple thin-walled deep groove ball bearing fault maintenance care measures

The cause of the thin-walled deep groove ball bearing noise compared complex, one is the bearing inner and outer appearance and wear. Due to the wear and tear, damaged bearing and shell, bearing and shaft cooperate relationship, invite axis deviation from the correct position, when axis at high speed movement produces sound. Metal flake when bearing fatigue, its appearance, also can make thin-walled deep groove ball bearing radial clearance increases produce sound. In addition, the lack of bearing is smooth, dry friction, and bearing broken etc all make abnormal noise. Bearing wear loose after kuang, adhere to the looseness damage, also can produce sound. Thin-walled deep groove ball bearings will be removed to check the use way such as photography completes the first recorded appearance. In addition, to confirm the quantity of residual smooth agent and the smooth agent, sampling, and then clean the bearing. A, bearing cleaning rough washing and fine washing to stop, and can be put in use at the bottom of the container on the metal frame. B, coarse, with a brush in oil and other things clear smooth fat or adhesive. If at this time in oil rotating thin-walled deep groove ball bearings, rolling surface would be pay attention to as the foreign body, such as damage. C, fine cleaning, turn gradually in the oil bearing, must stop seriously. Usually use detergent for neutral aqueous diesel or kerosene, according to the demand is also sometimes used warm lye, etc. No matter use which kinds of detergent, often should filter stick to clean.