Matters which should pay attention to install the water pump bearing

At the time of installation of water pump bearing, in ring width equal pressure on the circumference of a circle, and then put the pressure into the ring. In order to avoid damage to the bearings, note cannot use ð ¨ +  top tools of pressing the bearing directly When, in the process of installation of water pump bearing of surplus quantity is small, we can be at room temperature using the sleeve bearing ring end face pressure, using ð ¨ +  head to knock the sleeve, and then through the sleeve ring is balanced Need to make sure that when pressed into the bearing outer ring end face and the shell shoulder end face pressure, and the water pump bearing inner ring end face and the shaft shoulder end also want to compaction, there can be no gaps. If you need large quantities of installation can use hydraulic press. Applying pressure on a: water pump bearing dismantling control under a: axial clearance of the bearing related tags: water pump bearings, water pump bearings, auto water pump bearing related news which cases will fever auto water pump bearing thermal and bearing performance of engine cooling system of key parts of automotive water pump bearing water pump bearing why use general auto water pump bearing grease appears channeling dynamic circumstance how to deal with related products