Maintenance of bearing reporter - bearing knowledge

Internal warehouse is packing is not standard or no packaging bearing, small to a few yuan a, big to 3, four thousand yuan a set. These bearings bare on the shelf, and higher temperature of the warehouse, daub on the bearing lubrication and maintenance role of original butter has dried, thus speeding up the bearing rust, will affect our production use. Aiming at this situation, purchase department organize personnel of the bearing cleaning and maintenance. Maintenance is divided into the following steps: 1, the first turn on the bearing in gasoline cleaning, wipe the residues of sludge and dust on the bearing, bearing all rusty wipe gently with the metallographic sandpaper polished, until no fingered rough feel. 2, use dry cloth after cleaning the bearing wiped dry, soaked in the anti-rust oil again. In this process, will fully contact with the anti-rust oil bearing, don't stop rotating bearing, so that the rust-proof oil forming oil film covering on the surface of bearing, achieve the goal of rust. 3, the next with lithium base grease, butter should be evenly coated on the surface of bearing, including inside and outside the circle, wheels, cage. And wipe while rotating bearing, makes the butter into the real bearing internal, sufficient lubrication effect. 4, the last procedure is packaging. In order to save costs, we 'waste', scrapping of cement bags in the warehouse, the packing bag of cut into appropriate size, bearing a good tight, package, label after good bearing specifications back on the store shelves. 【 The bearing network]