Koyo non-standard bearing manufacturing application at ordinary times common problems

Koyo non-standard bearing manufacturing application FAQ sources at ordinary times: bearing | last updated: - 2020 09 - 28 non-standard bearings normally used common problems of non-standard bearings, bearing in the operation of the load is too small, can cause drag between the ball and dovetail guideway, become creased. Especially the ball and ball bearing net major large and medium-sized non-standard bearings have this kind of trend. In many cases, the bearing will rust, caused by bearing rust has a lot of, because of the people living in the most common key has the following several kinds of elements: 1) Because of poor sealing devices, such as water, waste has been invaded; 2) Bearing long-term need not, out of phase anti-rust treatment, lack of maintenance. 3) Metal material roughness is very big; 4) Touch with organic chemical etching, bearing cleaning not clean, waste from surface, or use the hand touch the bearing khan, bearing after cleaning, not immediately packing or installation, long-term exposure to air, gas water erosion and contracted; 5) Working temperature and environmental humidity and touch a variety of natural environmental substances; Rust-proof invalid or quality does not conform to the rules.