Automatic tapping machine introduction to precision bearing with washing - bearing knowledge

1. Keep hands clean and dry automatic tapping machine & emsp;   The precision bearing with packaging, the operator's hand should be kept clean and dry, because of hand sweat can lead to rust, can wear gloves when necessary.     2. Guarantee good lubrication effect & emsp;   Remove the precision bearing shall be immediately for fat and oil processing, fatliquoring precision bearing out immediately after a clean install, don't make fat and oil processing. Fat when loading in the clearance between the bearing outer ring and cage must fatliquoring, precision bearing fatliquoring to 30% in the cavity for beautiful, high speed precision bearings fatliquoring to 20% of the cavity.     3. Packing should be sealed & emsp;   Precision bearing can only be removed from the original packaging cleaning before assembly. From multiple precision bearing of volatile corrosion inhibitor seal after several sets of them out of the packaging, the packaging will be immediately sealed, because the protection of the VIC paper gas can only be maintained in the sealed packaging. Automatic tapping machine & emsp;   4. Correct cleaning & emsp;   Fatliquoring precision bearing not cleaned before assembly, and fatliquoring precision bearing must be cleaned before assembly, should be dried after cleaning and rust-proof oil or grease, immediately to avoid rust. Can be used for precision bearing degreasing and cleaning the following cleaner: aqueous cleaner - Neutral and acidic or alkaline detergent, in cleaning before checking alkaline cleaner and the compatibility of aluminum parts;     Organic cleaning agent - Acid and anhydrous kerosene, light gasoline ( The motor gasoline) , freon 12 substitute or chlorine hydrocarbon cleaning agent. Precision bearing when cleaning should pay attention to the following: environmental protection, health and safety; Operation method of cleaning agents must follow the instructions, thank you for your cooperation.