YX120 distribution of the passive roller disassembly adjustment of driving

YX120 distribution vehicle passive roll 2018 - remove the adjustment 09 - 06 chun-xiao ma Zhang Shengbin ( Hebei baisha shijiazhuang cigarette factories) Failure performance YX120 distribution vehicle passive roller failure. Methods 1. Adjust the tension screw belt slack. 2. Electricity to the location of the grinding wheel between passive roller and the roller will be side guard A cut, divided into sheeting and guard C B. 3. Remove the chain. 4. Remove the lower cleaning roller. 5. With Lamar passive roller chain and bearing will be removed. 6. Remove the cutting line on the left side of the guard plate B. 7. Remove the replacement of a new passive roller and bearing. 8. Belt tension and remove the components of reset. 9. Place in the side guard plate cutting installation connection plate D, after making the segmentation of sheeting and guard C B fixed connection into an organic whole. 10. Driving debugging equipment, confirmed its normal operation. Operating essentials electric hand wheel in strict accordance with the instructions for use, wear protective equipment. Installation side panel to locate accurately, ensure that the connection plate D make the side plate fixed position and disconnect before, after adjustment to move along the slide block. Install shield and other accessories, ensure the safety of the equipment in good condition, operation. Improvement point of the original operating methods need to be cleaning roller, roller, driving wheel, and various bearing dismantling respectively, to the side guard plate is removed, final position to replace the passive roller from the side, the whole process is time-consuming, disassembling efficiency is low. New operation method, operation need to dismantle the connection plate and D and guard plate connection B chain, bearing, you can remove the guard plate, B, in turn, change the passive roller, and guard C connection of the driving wheel, roller and bearing are no longer need to disassemble, easy to operate, repair time and quantity were cut by half, effectively improve the efficiency of equipment maintenance.