When removing any item is to be aware of the ceramic bearing?

Bearing after after a period of use, are likely to appear different wear and tear, such as ceramic bearing and may exist in internal ceramic ball wear and the outer ring is intact. So there are many users can hope to the inside of the ceramic bearing for remove the word replacement parts, prolong the service life of the ceramic bearing already so can reduce the cost of replacement of bearings. In removing replacement, is, of course, can not directly use machinery to knock, this will cause the damage of the ceramic bearing. So we need to use special methods to remove it. Ceramic bearing is also there are different types, in the process of disassembly, should choose the appropriate way to remove, to ensure that in the process of remove the bearing will not cause damage. Ceramic bearing is divided into inner sleeve without a taper and inner sleeve tapered two kinds, in the disassembly, for different ways of bearing used in the disassembly are also different. We should know the bearing is used which kind of product, then according to the characteristics of the product disassembly, to ensure that in the process of removal of bearing is not damaged. For many ordinary users, for the structure of the ceramic bearing is certainly no way to know more clearly, there is no way to remove it when disassembling is stable, has a certain influence on sealed, the effect will be. It is recommended that the user use the process of ceramic bearing, once the bearing damage, still should replace the new product, can guarantee the use of the effect is better. If forced to remove, there was no way to remove the likely more successful, after the change of product use effect is not stable enough, but increase the cost of use.