Using one-way needle bearing maintenance matters needing attention

Bearing as the most common mechanical equipment parts, when using play different role in different bearing, today to get to know the one-way bearing and maintenance matters needing attention. 1, should be paid attention to in using the operation situation of one-way needle roller bearing, if discover the noise, shock, power increases suddenly, it is necessary to stop the machine immediately to check, troubleshooting, must overhaul when necessary. 2, under general conditions, one-way needle bearing lubrication operating 60 hours each time, in the tropics, high humidity, dust, large temperature variation of the region and under the condition of continuous operation, should increase the lubrication frequency. Machine before and after the stop over a long period of time, must also add new grease. Note oil slowly turn the one-way bearing, the grease filling evenly. 3, often examine case of seal are intact, if discover seal belt damaged should be replaced in a timely manner, if discover loss should be timely reset, tooth surface should be replaced periodically according to the working environment of grease, use the user should be according to the different working conditions, with a new grease. 4, used to prevent a one-way needle roller bearing is sun direct sun. Forbid water scour one-way bearing directly to waterproof into the raceway, close to fight a hard objects or into gear meshing area. Through the above introduction, believe that everyone should be to maintenance considerations of the use of a one-way needle roller bearing have some understanding, in fact, no matter what equipment or component when using must remember to maintain, need to remember never directly with water to flush the bearing, this would be a big problem, can lead to equipment downtime phenomenon is even more serious, so everyone at the time of maintenance must pay attention to find regular maintenance personnel.