Stainless steel bearing maintenance method

Used under the bad environment of the stainless steel bearings, often should check its using state, judge whether the normal operation, is there any debris into them, and if there is any deformation or murmur, once appear, the above situation, must be immediately to repair of stainless steel bearings, usually wash solution, serious need to be replaced. A, stainless steel bearing inspection and judgment standard judgment removed stainless steel bearing can be reused, to inspect the dimension precision, rotating accuracy, internal clearance and the matching surface, raceway surface, cage and seal rings etc. Judgment standard according to the mechanical properties and important degree and inspection cycle. If component fracture appear defects or raceway surface rolling surface stripping is the stainless steel bearings shall not be used again, must be replaced. 2, can continue to use the stainless steel bearings for cleaning stainless steel bearing will be removed to check, to record the appearance of the stainless steel bearings, and to confirm the amount of residual lubricant and lubricant samples, and then clean stainless steel bearing. Commonly used cleaning agent for neutral aqueous diesel or kerosene, according to the need to sometimes use warm lye, etc. No matter use which kinds of detergent, often should filter clean.