Smooth TIMKEN bearing grease filling amount of friction problem of cleaning method

In fat smooth situation, if add the initiative of smooth fat to the TIMKEN bearing ( As an added smooth , during the first few hours or a few days, According to the speed of the application) TIMKEN bearing friction to produce will be much higher than the initial value calculation. This is due to the smooth fat demand time, stirring in the bearing comfortable space spread again. To budget the effect of the elements, can be multiplied by a coefficient of rolling friction torque starting, the light series of bearing is 2, the weight bearing is a series of 4. But after 'break-in' stage, the friction moment of landing to the equivalent of the oil slick, in many cases, that may be down to a lower level. If to smooth an excess of fat in the bearing, bearing the friction can be incurred. TIMKEN bearing appears after injury, not all parts can repair, as long as those with TIMKEN bearing damage to demand the value of maintenance, it should be damaged TIMKEN bearing down stop inspection approval. If ever close to or reach the expected use life, there is no need for maintenance. In addition to judging whether had the requirement of repair, such as: understanding of TIMKEN bearing structural performance and manufacturing request, repair the needs of a variety of tools, equipment, measurement and control level of repair technology etc. In addition, the capital and after repair TIMKEN bearing performance can meet the working host requests must stop. If restricted by capital and purchasing conditions, some TIMKEN bearing energetic or purchase just to spare parts preparation and present problem is hard to change in time when the TIMKEN bearings, etc. , then think needs repairing.