SKF bearing installation steps

SKF bearing installation for the use of SKF bearing, longevity and performance has a direct link, so we in the use of SKF bearing, first of all need to know is the installation steps of SKF bearing, China bearing network according to understand detailed knowledge about the tell you. SKF bearing installation steps: 1, the shaft SKF bearing before installation, you must first remove the bearing a coat of fixed pin, the shaft neck at the same time clean exterior burnish is smooth, and in the shaft neck oil anti-rust and lubrication ( Allows for a slightly bearings on the shaft rotation) 。 2, in SKF bearing lubricating oil and SKF bearing fitting surface coating, the SKF bearing load bearing. Pushed to the required location for installation. 3, fixed SKF bearing bolts do not tighten, let the SKF bearing coat rotation reaction in the bearing seat. Also installed on the same shaft SKF bearing and on the other side of the seat, shaft turning laps, automatic alignment position for SKF bearing itself. Then good bearing bolts. 4, eccentric sleeve. The eccentric sleeve installation is firm, finally lock eccentric sleeve on the socket head cap screw. Warm prompt: the wrong installation SKF bearing, bearing not only don't work properly, and the matching surface will badly worn. Due to axial ring and seat and the difference is not obvious, the assembly should be extra careful, cannot appear upside. Install right should be its seat can automatically adapt to roller rolling, ensure the rolling element is located in the top and bottom ring raceway. In addition, SKF bearing seat and SKF bearing holes should also be left between 0. 2 - 0. 5 mm clearance, in order to compensate the error of parts processing, improper installation, when the bearing ring during operation center offset, the clearance can be adjusted to ensure the automatic, the avoidance of friction, make its normal operation. Otherwise, will cause the SKF bearing severe damage. 【 Warm prompt. 【 The bearing network] Some information from the Internet, and strive to secure timely, accurate, aims to deliver more information, does not represent our views to its approval or responsibility for their authenticity. If this net reprint information involves the issues such as copyright, please contact with this net. Tel: 0571 - 81630205. Tags: install and remove