Several of the major causes of analysis FAG rolling bearings clearance is too large

First of all, we should be very clear in what is a FAG rolling bearings clearance, clearance of the main causes is what, don't see the two problems will not be able to continue to look down, we first make a brief introduction below. Under the normal operating temperature depends on proper pre-load FAG rolling bearing load. Angular contact ball bearings or tapered roller bearings can withstand radial and axial load at the same time. Under the radial load bearing can produce effects on the axial force, typically by the second bearing. Two single row angular contact ball bearing or bearing configuration of tapered roller bearings back to back or face to face, each FAG rolling bearings must inherit from another bearing axial force. Two phase at the same time, bearing radial load at the centre of the two bearings, if FAG rolling bearings configuration adjusting zero clearance, half rolling parts under load can be automatically achieved load distribution. Should remember not only affected by the bearing elastic rigidity, and shaft and bearing flexibility, FAG rolling bearing ring installation cooperate and all other components in the stress field, including the influence of the elastic deformation of bearing. All of these factors on the axis of the whole system of elasticity has considerable influence.