Qingdao jiaxing bearing: rolling bearing assembly of general rules

Jiaxing bearing group sales co. , LTD. , is the spot sales center of jiaxing bearing factory, specializing in HRB bearings, application in production design and related machinery has a wealth of technical experience, today we are together and our experts to study the general rule of rolling bearing assembly. The general rule is as follows: rolling bearing assembly ( 1) Before installation, bearing, shaft and hole first and oil hole cleaning, washing and carefully; （ 2) Assembly to keep clean, strictly prevent dirt and copper scrap, scrap iron particles falling into the bearings, so as to avoid runtime scratch and lower bearing raceway surface precision. （ 3) Bearing assembly, should cooperate with tighter circle and add pressure or hammer, pressure ( Or hammer force) Must be evenly distributed around the perimeter of the ring. In this way, can avoid bearing slanting, damage of journal work surfaces or the bearing itself. （ 4) Bearing should face and shoulder, or with a hole of the bearing surface. （ 5) In order to make the rolling bearing work has some room for thermal expansion, two of the same axis bearing, there must be a bearing outer ring ( Or inner ring) In thermal expansion there is a little room for axial movement. Otherwise it will produce bearing biting phenomenon. （ 6) After the assembly, bearing rotating flexible, noise is very small. If you are more interested in jiaxing jiaxing bearing bearing factory introduction of Qingdao or have any questions, please click on contact us page on the right side of the online customer service, or call: 4006578186, jiaxing bearing retail center you thoughtful procurement consultant. - - - - - - Editor: Qingdao jiaxing bearing sourcing consultant LTD. All rights reserved, Retail sales center) Reprint please indicate the source