Method and double line shaft transmission method of tooth

Method and double line shaft transmission method of tooth 2021 - 01 - 23 main box at a shaft gear tooth of arbitrary two adjacent teeth on marking paint, and then the corresponding & 180 deg; Direction on the other side of the adjacent two tooth to do the same tag. Teeth should be equal between the two sets of tags. In two intermediate meshing gear inner hole groove are respectively with the addendum surface marking paint, this tag is the only one. Two intermediate shaft assembly, often meshing gear tooth inserted respectively marked marked a shaft gear tooth groove. Such as assembly right is a flexible shaft rotation to rotate or heavy should check for tooth marks are correct. Deputy box on the vice box intermediate shaft tooth addendum surface coated with 'O' signs marking paint, this logo is the only one. Reduction gear vice box in any two adjacent teeth on marking paint coating, and then the corresponding 180 & deg; Direction of the same mark in the other side of the adjacent two teeth. Teeth should be equal between the two sets of tags. Two deputy box intermediate shaft assembly, gear tooth inserted marked vice box marked reduction gear tooth groove. Auxiliary transmission assembly to the main box should be carefully check the tooth marks, again confirmed assembly. （ Source: web)