Introduction to stainless steel bearing 625 fracture failure reason ( 5)

Introduction to stainless steel bearing 625 fracture failure reason ( 5) / small hong, any kind of material of bearing in operation time, more or less will have a fracture failure. This kind of situation, even the old brand SKF bearing, NSK, FAG bearing and so on will appear, what's more, our company's main products are stainless steel standard bearing? In fact, when the stainless steel bearing 625 appear this kind of circumstance, don't panic. 625 stainless steel bearing failure of the main reason is the defect and overload two factors. When the loads more than material strength limit fracture caused by parts called overload fracture. Overload reason mainly is the main engine failure or improper installation. Bearing parts of micro crack, shrinkage cavity, bubbles and large foreign impurities, overheating organizations and local burns and other defects during the impact overload or violent vibration will cause fracture in defect, known as defect fracture. It should be pointed out that the bearing in the process of manufacturing, for raw materials into the factory reinspection, forging and heat treatment quality control, process control through instrument analysis of the existence of the above defects and correct still must strengthen control in the future. But in general, usually most of the stainless steel bearing fracture failure for overload failure. So, in the case of not sure is that kind of problem, I/small hong exhort you, don't panic. Calm down, slowly analysis, perhaps can find stainless steel standard bearing S606ZZ fracture failure reason. So, can better solve the problem of mechanical operation. Hope to know more knowledge bearing, please concern '' or alibaba bar search 'jiaxing co. , LTD.