Installation is properly affects the precision of the imported SKF bearing, life and performance

Bearing is one of the important parts on construction machinery, poor installation will affect its use effect, even result in engineering machinery and equipment failure. If imported SKF bearing with iron filings, burr, dust and other foreign matter to enter, will make the imported SKF bearing noise and vibration during operation, and even damage raceway and rolling body. So, before the installation of imported SKF bearing, must ensure that the installation surface and the environment clean. Lubrication of the bearing work and life have very important influence. Grease made out of base oil, thickener and additive. The performance of the grease is mainly determined by the base oil. The basis of generally low viscosity oil is suitable for low temperature, high speed; High viscosity is suitable for high temperature, high load. Thickener and relationship with lubrication performance, thickening agent, water resistance to the water resistance of the grease. In principle, different brand of grease can't mix, and even the same thickening agent of grease, will also bring bad influence each other on the basis of different additives. Imported SKF bearing surface coated with anti-rust oil, must use clean petrol or kerosene cleaning carefully, then coated with clean, high quality or high speed high temperature lubricating grease before installation. Fully enclosed imported SKF bearing not clean fuel. In SKF bearing imports after installed, if not done carefully alignment, alignment could lead to import bearings SKF suffered another load, friction, and vibration. These could accelerate fatigue and reduce the service life of imported SKF bearing, and it might damage the other machine parts service life. In addition, the increase of vibration and friction could significantly increase the risk of energy consumption and premature failure. During the period of using, often should run on SKF bearing imports basic external condition monitoring, such as temperature, vibration and noise measurement, etc. These regular check will help identify potential problems and to prevent unexpected machine to suspend the phenomenon, make the production plan, improve plant productivity and efficiency. In the process of operation, import SKF bearing requires correct lubrication again, perfect its performance. Imported SKF bearing lubrication method, divided into grease lubrication and oil lubrication. In order to make the imported SKF bearing function well, first of all, to choose suitable for conditions of use, the purpose of lubrication method. If only consider lubrication and oil lubrication. Grease lubrication but have can simplify the structure of imported SKF bearing around specialty. Hydraulic pump with imported SKF bearing plunger pump is the most important components of the bearing. Reduce the negative pressure in the imported SKF bearing is to prevent the water into the basic requirements. Angular contact bearing load calculation. Oil for maintenance of locomotive bearing is very important. Motor imported SKF bearing why will overheat.