INA bearing the advantages of using oil - bearing knowledge

INA bearing is precision components, and its use should be measured accordingly. No matter how high performance bearing use, if use undeserved, high performance will not be expected. So what is the bearing use method? When using bearing must pay attention to the following: 1, keep the bearing and the surrounding clean. Even the eyes can't see the little dust, will also bring bad influence to the bearing. So to keep the surrounding clean the dust from invading INA bearings. 2, carefully use bearing in use for bearing strong impact, will produce scar and creasing, become the cause of the accident. Severe cases, can crack, fracture, so must pay attention to. 3, use the appropriate tools to avoid operation with existing tools to replace, must use the appropriate tools. 4, to pay attention to the corrosion of INA bearings bearing operation, sweat will become the cause of rust. Pay attention to the operation with clean hands, it is better to try to bring gloves. Understand the use method of bearing will have twice the result with half the effort, it is very important. When near bearing mechanical parts have been used for oil lubrication or need to rely on lubricating oil cooling, bearing lubrication should be adopted. In bearing heavy load and high speed, or with external heat comes in, there may be a cooling requirements. Trace the lubrication method is used, such as oil drip lubrication, oil mist lubrication oil and lubrication, can keep stirring oil loss and bearing friction are quite small. When using do air carrier, could directly and make the air helps to seal oil. INA bearings of high speed and need good cooling mild place, a large number of lubricating oil can be directly spray to all of the contact surface.