Imports of non-standard bearing manufacturing installation would you? How should operate

Imports of non-standard bearing manufacturing installation would you? What should operation source: bearing | last updated: - 2020 07 - 11 non-standard bearings have many models, but to sum up and SKF and several types of non-standard bearings and the most commonly used for non-standard bearings bearing, its installation conditions is not very strict, but also to be in when installation, pay attention to the requirements of the installation environment, such as the installation distance can produce debris or powder and water machine far away, to prevent the pollutants into the bearing inside, especially the grains of sand, for bearing life is the most serious damage. Non-standard bearings, also to the requirement of installation tool is special for different models, non-standard bearing installation tools are different, so be sure to check before installation bearing model, and then select the installation tool, for the bearing are critical to the long-term use, installation tools have a hammer, sleeve, press, thread cutter, caliper, micrometer, etc. , reasonable, to ensure the bearing is installed correctly. Before installing, be sure to check the surface of the bearing installation, if there is a scratch, sand, rust and other signs, if so, then after installation will be on the bearing internal damage, because the sand grains or scratches on the non-standard bearing inner ring surface grinding, result in bearing damage, the corrosion effect is more serious, so before installation must be in shaft neck, installed base hole for a thorough check, if there is a foreign body or damaged, the need to install the bearing after processing, and various connection parts of the inner surface and outer surface is clean and smooth, and so on conditions, if not cleaned up and installed in the clean surface, can cause bearing shift in the use process. Non-standard bearings for environment and installation process requirements are relatively high, so the installation time needs to have certain technical experience of operation to ensure correct installation.