Importance - bearing KOYO bearing maintenance and maintenance knowledge

KOYO bearing maintenance and maintenance is very important, it is related to its service life, the work efficiency, to know how to maintain their own use of KOYO bearings, benefit a lot, from the aspects of work said it bring you a high production efficiency, manufacture precision of products quality, and from the aspects of economy, the maintenance of a few times can prolong life save you time to purchasing cost. A ball bearing retainer structure, its for a ring structure, for a number of ball bearing interval set, KOYO bearings and expectations in the ball bearing rolling, retainer including several interval, interval forming cant have contact, cant contact with the inner end face to form a wall thickness between 60 to 85 degrees Angle; Therefore geometric shape, which can effectively avoid the ball inside the retainer in the process of high speed rolling forming concentrated force, and shave their ball bearing lubrication on the surface of the body, can keep the lubrication body evenly coated on the surface of the ball, bringing the ball bearing and ball bearing has better lubrication conditions. New pump put into use, must be replaced after running 100 hours (grease Oil) 1, 500 hours after each run. Flow KOYO bearing is lubricated by grease, run after 1500 hours, should be replaced, grease filling of oil is too much or too little, KOYO bearing because of too much or too little can cause fever, KOYO bearing grease amount generally in KOYO bearing should be 1/2 to 2/3 of the chamber volume. For KOYO bearings used lubricating oil, oil should be added to the specified location. Containers of lubricating oil or grease to clean, should be sealed at ordinary times, should not have dust, iron and other sundry, lest damage KOYO bearing. Motor bearings commonly used sodium base grease, this kind of ability is the feature of high temperature grease ( 125℃) , but easy to dissolve in the water, so can't use it for water pump KOYO bearing lubrication.