IKO bearing lubrication and maintenance method

For as long as possible in good condition to maintain IKO bearing performance, maintenance, repair, in order to prevent accident arrangement to ensure the reliability of operation, improve the productivity and economy. To maintain the best conditions of mechanical operation of the corresponding operation standard, on a regular basis. Content includes monitor running status, supplement or replacement of lubricants, remove the check on a regular basis. As maintenance issues in the operation, have bearing the rotation of the sound, vibration, temperature, the state of the lubricants and so on. The overhaul bearing of the bearing cleaning: removing IKO bearings under repair, first record the appearance of the bearing, confirm the residual stock of lubricant, sampling inspection with lubricant, bearing. Common use gasoline, kerosene as a cleaning agent. Tear open come down to the bearing cleaning, rough washing and fine washing, respectively in the container, put a metal mesh bottom first, make the bearing is not direct contact with dirt from the container. Coarse when cleaning, if to spin bearing with dirt, can damage the bearing rolling surface, should be pay attention to. In coarse clean oil, use a brush to remove grease, adhesive, after clean, roughly into fine cleaning). Fine cleaning, bearing side rotation in the cleaning of oil, while carefully cleaned. In addition, the clean oil is always kept clean. IKO bearing inspection and judgment: in order to judge whether the bearing of the removed can use, check after wash bearing. Check the raceway surface, rolling surface, cooperate with the state, the abrasion of cage, the increase of IKO bearing clearance and has nothing to do with dimension precision falling damage, abnormal. Non separation of small ball bearings, with one hand will support level, the inner ring spinning confirm whether smooth outer ring. Separation of tapered roller bearings and bearing, rolling body, the outer ring raceway surface can be respectively. Large bearing can't rotate with the hand, pay attention to check the rolling element and raceway surface, cage, guard surface appearance, such as the importance of bearing high must check carefully. Oil mist lubrication compared with other lubrication method, has many unique advantages: 1, oil mist with compressed air dispersion to import bearing all need lubrication friction parts. Can get good and uniform lubricating effect. 2, greatly reduce the imported bearing lubricating oil consumption. 3, compressed air, low heat, high velocity, it is easy to take away the heat generated by the imported bearing friction. 4, because the oil mist has certain pressure, so you can have good sealing effect, avoids the external impurities and moisture intrusion IKO bearing friction pair. 5, and a thin oil circulation lubrication system structure is simple and lighter, cover an area of an area small, low power consumption, low maintenance management is convenient, easy to realize automatic control, the cost is low.