Correct maintenance and use the method of TIMKEN bearing - bearing knowledge

1, the installation of TIMKEN bearings TIMKEN bearing installation is correct, affects the precision, life and performance. Therefore, design and installation of assembly department for TIMKEN bearing to fully research. Hope to work in accordance with the standards for installation. Operation standard project usually is as follows: ( 1) Cleaning bearings and bearing components (associated 2) Check the size of the interrelated parts and finishing ( 3) Installation ( 4) After installed bearing inspection ( 5) Supply lubricant 2, TIMKEN bearing alignment and alignment after the TIMKEN bearing installed, if not done carefully alignment, alignment can lead to bearing suffered another load, friction, and vibration. The use of these may accelerate fatigue and reduce the bearing life, and it might damage the other machine parts service life. In addition, the increase of vibration and friction could significantly increase the risk of energy consumption and premature failure. 3, TIMKEN bearing basic condition monitoring during the period of using, often should run of TIMKEN bearing of basic external condition monitoring, such as temperature, vibration and noise measurement, etc. These regular check will help identify potential problems and to prevent unexpected machine to suspend the phenomenon, make the production plan, improve plant productivity and efficiency. 4, again for TIMKEN bearing lubrication in the process of operation, bearing requires correct lubrication again, perfect its performance. The method of bearing lubrication, divided into grease lubrication and oil lubrication. In order to make the bearing function well, first of all, to choose suitable for conditions of use, the purpose of lubrication method. If only consider lubrication and oil lubrication. But there are grease lubrication can simplify the structure of bearing around specialty. 5, TIMKEN bearing of unloading when the TIMKEN bearing will reach its final use period, should be replaced. Although TIMKEN bearings can not be used, but properly unloaded the original bearing, replace new bearing in time, to extend the service life of new bearing can play a good role in promoting. First of all, the use of appropriate tools unloaded method will help prevent damage for other machine components; Second, is not correct to unload the technology may cause harm to the operator.