Clean stainless steel bearing with what liquid 29)

Cleaning stainless steel bearings with what liquid/small hong stainless steel bearings how to cleaning? Believe that many people who are exposed to clear. Different bearing, cleaning methods are also different. The following by me/small hong for simple tell you: stainless steel bearing cleaning gasoline + kerosene the most primitive method. Today, the society calls for the safety, environmental protection, energy saving is more and more big, the water-based cleaning technology mature gradually, significantly lower cost, therefore, more and more people prefer water-based cleaning. Divided into coffee cleaning and final cleaning cleaning. From material to product, the product through multi-channel processing process to the finished product, need a lot of coffee during cleaning. Process is different, cleaning method is slightly different. Product structure, the weight is different, use of cleaning equipment also have differences, often using the ultrasonic cleaning and spray cleaning. Now the mainstream of the stainless steel bearing cleaning are using kerosene, but as the environmental protection, health and safety aspects of attention, hydrocarbon cleaning agent is accepted by many big customers, is also slowly promotion. Hydrocarbon cleaner than kerosene, the main characteristic of water-based cleaning agent for: a. Good cleaning ability. Most hydrocarbon cleaning agent and anti-rust oil, machine oil grease with non-polar oil fractions, hydrocarbon cleaner such as mineral oil effect is good. two High boiling point. Natural evaporation loss is small, and equipment for packing seal request is not high. 3. No residue after drying. Hydrocarbon cleaning agent is a very pure refined solvents, can completely evaporate when dry, no residue. Four. Non-toxic. Inhalation toxicity of hydrocarbon cleaning agent, through the mouth contact toxicity and skin toxicity are of low toxicity, and does not belong to carcinogens, high safety. Five. Material compatibility. Hydrocarbon cleaning agent in excluding water and chlorine, sulfur corrosion, for all kinds of metal materials won't produce corrosion and oxidation. Six. Low viscosity, surface tension is small. Hydrocarbon cleaner impregnation effect is good, easy to dip to the narrow the gap of the workpiece. When cleaning bearing, there is no dipping blind Angle. Seven. Environmental protection. And kerosene is not special cleaning agents, complex composition, containing aromatic hydrocarbons, sulfur, chlorine and other machines have corrosion, for people with health hazard substances. Water-based cleaning agent of organic contamination of the cleaning effect is poorer, easy to have residual in the bearing surface active agent, after cleaning is not easy to dry, rust resistance is not good, so when cleaning bearing products are generally not used water-based cleaning agent. Regular cleaning method, including ultrasonic cleaning, spray cleaning, rinsing, etc. Hope to know more knowledge bearing, please concern '' or alibaba bar search 'jiaxing co. , LTD.