High Precision Auto parts 60TKZ3503 Clutch Release Bearing

Clutch Release Bearing: 

The clutch release bearing is installed between the clutch and the transmission. The release bearing seat is loosely sleeved on the tubular extension of the first shaft bearing cover of the transmission. The shoulder of the release bearing is always against the release fork through the return spring and retracts to the final position. , Keep a gap of about 3~4mm with the end of the separation lever (separation finger).

Working conditions:
During use, it is affected by axial load, impact load, and radial centrifugal force during high-speed rotation. In addition, because the fork thrust and the reaction force of the separating lever are not in the same straight line, a torsional moment is also formed. The clutch release bearing has poor working conditions, intermittently rotating at high speed and bearing high-speed friction, high temperature, poor lubrication conditions, and no cooling conditions.

Use note:
1) In accordance with the operating regulations, avoid the clutch half-engaged and half-disengaged and reduce the number of times the clutch is used.
2) Pay attention to maintenance. Use the steaming method to soak the butter so that it has sufficient lubricant during regular or annual inspection and maintenance.
3) Pay attention to leveling the clutch release lever to ensure that the elastic force of the return spring meets the requirements.
4) Adjust the free stroke to meet the requirements (30-40mm) to prevent the free stroke from being too large or too small.
5) Minimize the number of joining and separation, and reduce the impact load.
6) Step on lightly and easily, so that it can be joined and separated smoothly.