Arrange ushering bearing structure characteristics and the model said

A, arrange ushering bearing structure characteristics: 1, the bearing core and bearing combination of bearing units. Most of the outer diameter of the outer spherical bearing core, with spherical inner hole of the bearing block matching installation; 2, the structure forms, good versatility and interchangeability; 3, have outstanding so and sealing performance, and can work under harsh environment; 4, easy to use, easy to install. Second, arrange ushering bearing -- — Bearing core structure, model and size of method: 1, UC bearing core structure, model series and the representation method for the size: structural characteristics, prominent on both ends of the bearing inner ring, with tight set screw. Type series: UC2xx, UC3xx, UCXxx. English as UC201 - 12. Size calculation: metric system and the general calculation method of the class with the same. Inch size for hexadecimal, such as UC201 - Inside diameter size of 12:12/16 x 25. 4 = 19. 05mm。 Series, UK bearing core structure, type and size according to methods: structural characteristics: for flat head on both ends of the inner ring, inner hole taper. Need to fit the set set during installation. Type series: UK2xx, UK3xx, UKXxx. Size calculation: metric system and the general calculation method of the class with the same. Set set choose: if UK210 bearing core with H2310 set. 3, bearing the core structure, model B series and size representation: structure: the bearing inner ring end flat, one end is outstanding, with tight set screw. Type series: metric Bx; English: Bx - X or Bx - xx。 Size calculation: generic class the same metric size calculation method. English as B6 - Diameter of 18:18/16 x25. 4 = 28. 575mm。 4, CS bearing core structure, model series and size of methods: structural features: flat head on both ends of the bearing inner ring, rubber belt cover seal. Type series: CS2xx ( ASAHI) =SC2xx( 臂) 。 Size calculation: generic class the same metric size calculation method. 5, KH bearing core structure, model series and size of methods: structure: the bearing inner ring end flat, one end is outstanding, with eccentric annulus. Type series: metric KH2xx; English: KH2xx - X or KH2xx - XX。 Size calculation: generic class the same metric size calculation method. English as KH206 - Diameter of 18:18/16 x25. 4 = 28. 575mm。 6, UG bearing core structure, model series and size of methods: structural characteristics: prominent on both ends of the bearing inner ring, with eccentric ring ER. Type series: UG2xx + ER, UG3xx + ER. Size calculation: generic class the same metric size calculation method. Three, bearing code said P: vertical casting. Series have P2xx, P3xx, PXxx. PA: narrow vertical casting. Series have PA2xx, PA3xx, PAXxx. PP: stamping vertical. Series have PP2xx, PP3xx, PPXxx. F: casting square. Series have F2xx, F3xx, FXxx. FS: casting square convex. Series have FS2xx, FS3xx, FSXxx. FL: casting the diamond. Series have FL2xx, FL3xx, FLXxx. FC: casting round convex. Series have FC2xx, FC3xx, FCXxx. C: casting ring. Series have C2xx, C3xx, CXxx. Fk1 - FK: casting hanging bridge. Series have FK2xx, FK3xx, FKXxx. T: casting the slider. Series have T2xx, T3xx, TXxx. Note: (1) UC201, UC202, UC203, UC204 diameter sample, with the same bearing seat ( As with P204) ； (2) core metric and imperial bearings with the same bearing. Such as UC207 and UC207 - With the same 20 P207.