Analyzed the influence of the TIMKEN bearing material for its life

Due to the different TIMKEN bearings provide a variety of different materials, production technology and coating equipment, so everyone when choosing bearing should select the most appropriate according to the specific application requirements. Embedded in the rolling bearing in the contact seal, is has a significant effect on the performance and reliability of the bearing, and can be set on the performance of the bearing itself has a great influence. General consideration of bearing ring and rolling body including: hardness, related to the bearing capacity under different cleanliness in rolling contact and the lubrication condition of fatigue resistance, and the stability of the size. For cage, want to consider friction, strain, and the inertial force, and in some cases but also with some lubricants, solvents, coolant and refrigerant of chemistry in Germany. The importance of these considerations relative also influenced by other working parameters, such as corrosion, high temperature, impact load or a combination of these factors. 1, the installation of TIMKEN bearings TIMKEN bearing installation is correct, affects the precision, life and performance. Therefore, design and assembly department for the installation of the bearing be fully studied. Hope to work in accordance with the standards for installation. Operation standard project usually is as follows: ( 1) Clean the bearing and the bearing connection parts; ( 2) Check the size of the interrelated parts and finishing; ( 3) Installation; ( 4) After installed bearing inspection; ( 5) Supply of lubricant. 2, alignment, alignment after bearing installed, if not done carefully alignment, alignment can lead to bearing suffered another load, friction, and vibration. The use of these may accelerate fatigue and reduce the bearing life, and it might damage the other machine parts service life. In addition, the increase of vibration and friction could significantly increase the risk of energy consumption and premature failure. 3, the basic conditions for monitoring during the period of using, often should basic external conditions of bearing operation monitoring, such as temperature, vibration and noise measurement, etc. These regular check will help identify potential problems and to prevent unexpected machine to suspend the phenomenon, make the production plan, improve plant productivity and efficiency. 4, again the lubrication in the process of operation, TIMKEN bearing requires correct lubrication again, perfect its performance. The method of bearing lubrication, divided into grease lubrication and oil lubrication. In order to make the bearing function well, first of all, to choose suitable for conditions of use, the purpose of lubrication method. If only consider lubrication and oil lubrication. But there are grease lubrication can simplify the structure of bearing around specialty. 5, unloaded when the TIMKEN bearing will reach its final use period, should be replaced. Although bearing can no longer be used, but properly unloaded the original bearing, replace new bearing in time, to extend the service life of new bearing can play a good role in promoting.