You must be aware of before and after the installation of high temperature bearing, otherwise. 。 。

You must be aware of before and after the installation of high temperature bearing, otherwise. 。 。 A, before the installation note item 1, check the bearing have quality problems. Rotation can be flexible, carefully check whether there is any defect on surface of bearing parts, such as indentation, burns, cracks, etc. Severe stem load parts with quality problems. 2, ensure the installation site clean, keep a foreign body into the bearing inside. 3, ensure high temperature bearing clean, no wash good bearing don't fit. 4, loss of sealing quality. Carefully check the packing specifications, size can be suitable for, can have a defect or quality issue, related accessories can complete, can cooperate with reasonable. Second, pay attention to item 1 when installation, bearing inner sleeve installation required by induction heating, and shall not exceed 120 ℃. It is strictly prohibited to open flame heating disassembling bearing. 2, poor loads, find out the reason, eliminate problems after adoption of reasonable measures, found has the problems such as deformation of parts to repair in time, when necessary to correct the drawings. 3, avoid hard outfit, impact, it is necessary to ensure load bearing, bearing and a hole for the small clearance fit, the normal situation should be light on face is loaded, hard hit diagonal loading much more difficult, which can hurt the surface of bearing hole so that scrap. 4, strict according to implore inject enough, clean grease. 5, installation is found unqualified parts, such as sealing, gland son must strict scrap or repair, with quality to ensure assembly quality. A: bearing technical personnel share remove bearing and does not damage a part next up: in order to avoid bearing burns, detection of cleanliness