When disassembling crusher maintenance bearings how to tear open outfit

When disassembling crusher maintenance bearing 2020 - how to tear open outfit 10 - 01 bearing as an integral part of equipment operation, the importance of it in crushing equipment as hammer and lining board. Once the bearing appear problem, must stop the machine immediately to check and keep relevant records, according to the situation to decide whether to replace new bearing. 1. Remove the bearing note first need to replace new bearing will be remove damaged bearings. The removal of bearing is in preventive maintenance or operation involved when an exception occurs need to replace the bearing, preventive maintenance need to change to use bearing for a longer time. Removing bearings must first understand the cause of the abnormal of the bearings, recorded, danger and prevent abnormal happen again. （ 1) Used to collect and retain the lubricant. （ 2) Reserve the bearing damage. （ 3) The abnormal items recorded in the operation. （ 4) Keep running the bearing situation when abnormal record. 2. Bearing lubricant is very important for bearing the installation of the homework, therefore, the bearings after installation, be sure to use outer ring tilt coated bearing lubricant. （ 1) Lubricant coating. Grease lubrication coating cover all roller surface, besmear after will recover the location of the outer ring. All lubricating oil coating roller surface, besmear after will recover the location of the outer ring. （ 2) After coating, with plastic film covering the dust, etc. For crusher user, equipment repair need professional and technical personnel, so as not to cause unnecessary damage to equipment. Also, often for equipment maintenance, regular overhaul, repair, and minor repairs, check, found the problem in time, can be killed in the bud, to ensure the long-term normal operation.