Wheel bearing installation and maintenance points make jiaxing bearing small make up

There is rotational, have HRB bearing ( ) Wheel bearing installation and maintenance points let jiaxing bearing the authors explain. Jiaxing bearing group sales co. , LTD. ( The company) Is jiaxing bearing factory set up in the spot sales window, specializing in HRB brand bearings, facing the whole country, the existing stock 50 million yuan, covers the whole bearing, have very strong cash supply ability. Wheel bearing is a kind of can bear larger axial load, radial load and tilting moment, a comprehensive load bearing, rotating, transmission, fixed, and other functions in one of the special structure of large bearing. As a result, the wheel bearing when installation to must do the inspection of the correlation, or matters need to pay attention to when installation, for the large bearing, we must do a good job, maintenance, storage, and so on in order to avoid had the following wheel bearing damage, lead to can't normal use. 1 prior to the installation wheel bearings, wheel bearings, first check the mounting surface of the host, for supporting members should have sufficient strength, junction surface should be mechanical processing, surface smooth without sundry and burr. Mechanical processing for unable to meet the requirements of planeness, can use special plastic filler injection intensity, to ensure the accuracy of the installation plane and for vibration reduction. Wheel bearing ring with quenching soft belt region, in the ring on the face of all marked 'S', when installation should be in the position of the soft belt on the load area or not often load area ( Plug hole is always located on the soft belt) 。 Installing a wheel bearing, should be advanced ways to locate, cross tighten mounting bolts, and monitor the rotation of the bearing. And tighten the screw down the bolt should be enough, it shall be the bolt pretightening material yield limit of 70%. Install bolts should be with conditioning flat washer and spring washer is strictly prohibited. 2, wheel bearing maintenance: installed and functioning of the wheel bearing after the continuous running 100 hours, should be a comprehensive check installation bolt pre-tightening torque is in line with the requirements, after each repeat this check a continuous run of 500 hours. Wheel bearing installed should fill the right amount of grease, and should be filled and slewing bearing with grease evenly distributed. Wheel bearing at work after a period of time, will inevitably lose part of grease, so the wheel bearings in normal operation intervals of 50 ~ 100 hours after a grease should be added. 3, wheel bearings, transport and storage: bearing in the process of transportation, should be placed on the vehicle, due to prevent sliding and the measures to prevent vibration, plus auxiliary support when necessary. 24-hour customer service hotline: if you are more interested in jiaxing bearing the author introduced the industry information or have any questions, please click on contact us page on the right side of the online customer service, or call:, you close the way of jiaxing bearing purchasing advisors. - - - - - - Editor: jiaxing bearing sourcing consultant LTD. All rights reserved, The company) Reprint please indicate the source