What is a bearing sleeve back you know?

At first contact bearing, the tight sleeve and withdrawal sleeve is confused about, always silly points not clear. Don't know any friends like small make up confused? Sleeve is back here to you talk about what is going on. What is the bearing push to take off you know? Sleeve is mainly used for back taper hole fixed on the ladder shaft bearings cylindrical journal. The CCTV and set different, set for both to optical axis, and can be used for ladder shaft. Shaft and sleeve wisdom can only be used for ladder. Withdrawal of crushed into on the shoulder or similar installation between the cone bearing and shaft, then with a nut or end plate should be fixed on the shaft. Due to the shaft end thread can have different size according to the practical application, and lock nut or end plate with the withdrawal of supply, demand order separately. Removing withdrawal of the nut also demand order alone. Withdrawal sets in appearance with rust inhibitor, a slit on set, appearance ordinary for the taper 1:12. Removing withdrawal of the nut also demand order alone. Application of filling method can simplify the bearing assembly and disassembly, in line with this approach, common custom company to be able to provide with the design of the oil and oil tank. These AOH withdrawal set at the side of the threaded with two oil entrance. In the withdrawal of conical surface and cylindrical appearance, all have some oil groove along the circumferential direction and the axial dispersion. After the injection of oil and oil tank of the hydraulic oil, bearing and push to take off and between shaft and sleeve with appearance back will form a layer of oil film, can greatly reduce gear bearing demand by force.