Waxing Wholesale single row angular contact ball bearing manufacturer

Company Advantages
1. Waxing is strictly inspected. It is carried out by our QC team who checks its flammability, tension, corrosion resistance, and other performance characteristics. The internal structure of the product compensates for shaft deflections and housing distortions caused by the heavy loads
2. Our system offers capability meeting production requirements. Its sliding and abrasion resistance properties have been greatly enhanced
3. It demonstrates good isolation of body movements. The sleepers do not disturb each other because the material used absorbs the movements perfectly. The high-quality roller bearing can help the product achieve high thrust capacity
4. The product will not expand or contract under extreme temperature. The timber has gone through the heat- and cold-pressing workmanship, which can keep the panel centered and stable. Thanks to the high-grade steel ball, it stays quiet and smooth during high-speed running

Angular contact ball bearing

Angular contact ball bearings have a greater number of balls and higher capacities than deep groove ball bearings with the same boundary dimensions and are suitable for higher loads and speeds with proper lubrication. However, because of the absence of a flange on one side of the outer race, they are capable of supporting thrust loading in only one direction. This is why most applications employ two of the same bearing bearings facing opposite directions, often as a duplex pair. To obtain American BAC bearings capable of duplex mounting, they must be ordered “flush ground”, designated by the “G” suffix. “G” basically means “No axial clearance, no preload.” In cases where the tandem mounting is required, another bearing with thrust capability is usually employed on the shaft to take thrust or locate the shaft in the opposite direction as the pair.

Preloading is often employed with duplex pairs of BAC bearings for various reasons, and their suffix designations are as follows:

Flush ground BAC bearings are sold and packaged individually, meaning any two randomly selected “G” bearings can be mounted together. Preloaded bearings follow the common industry practice of being sold individually, but packaged in pairs.

All American angular contact bearings come with a standard machined brass cage and will have an “M” suffix in their bearing numbers.

Unless otherwise specified by the end user, we will supply bearings with the popular 40 degree contact angle: “B” suffix.  These types of bearings are found in vertical motor, pumps, and thrust application throughout industry.  

We can manufacture industry standard and custom designs from 8”/200mm bore to 63”/1600mm bore.

Company Features
1. Zhejiang waxing electromechanical co.LTD. is a China-based manufacturer with years of experience in the production of . We have earned a solid manufacturing experience.
2. Zhejiang waxing electromechanical co.LTD. is a company that focuses on the quality of single row angular contact ball bearing.
3. We hold the persisting view of double row angular contact ball bearing to guarantee the quality of the products. Call now!