Waxing high speed pillow block bearings manufacturer

Company Advantages
1. Waxing high speed pillow block bearings is treated well. It has gone through following procedures include slotting, straightening, micro-bead blasting, tumbling, ultrasonic and steam cleaning, as well as chemical and microdot marking. The high-quality roller bearing can help the product achieve high thrust capacity
2. The product is available at very competitive prices and is widely used in the market. It is strong in its rigidity against the radial load
3. The product is durable. The encapsulation material of the battery is manufactured with high quality to enhance cell performance and provide a longer service life. The product has good acceptable axial load capacity in both directions
4. The product features great energy efficiency. It can squeeze as much useful power out of as little energy as possible, not generating any waste. Thanks to the high-grade steel ball, it stays quiet and smooth during high-speed running

Spherical bearing with seat

Mounting Spherical Plain Bearings

To facilitate mounting, the ends of pins or shafts and the edges of housing bores for spherical plain bearings should have a lead chamfer of 10° to 20°.  The bearings can be more easily pressed into position and there is little risk of damage to the mating surfaces being caused by skewing of the bearing.

When mounting spherical plain bearings with a fractured or two-part outer ring, it is essential that the joint should be positioned at 90? to the main load direction; otherwise the service life will be shortened, particularly under heavy loads. Also, the bearing’s lubrication holes will be placed in the load zone, allowing lubricant distribution where it is needed most.

Bearing rings should NEVER be hammered into place. Only apply mounting forces onto the ring that is being mounted (i.e. force on outer ring if being pressed into a housing, force on inner ring if pressed onto a shaft). NEVER apply mounting forces though the bearing’s sliding surfaces, this will damage the bearing and will severely decrease its service life. In the event that the bearing has a press fit on both the inner and outer rings, a special tool should be made to allow pressing of both components simultaneously.

Other ways of mounting with the facilitation of heat or refrigeration, or with the use of adhesives may be possible also, please contact AST Engineering for further assistance.

Company Features
1. Our customers have witnessed Zhejiang waxing electromechanical co.LTD.'s rapid development in high speed pillow block bearings business over the years. We have earned praise from customers and new prospects via word of mouth, and our customer data shows that the number of new customers is increasing year by year. This is proof of recognization of our manufacturing and services ability.
2. We have imported a series of manufacturing facilities. They are extremely flexible, allowing us to produce products exactly to our customers’ specifications.
3. We have well-established teams of workers. All of the team members take great pride in mastering their craft in our state-of-the-art facilities. We've fostered a culture which is based on openness, honesty, integrity, and fairness. And we empower our people to go beyond what is required to meet legal and regulatory obligations. Welcome to visit our factory!