Waxing custom heavy duty pillow block bearings at discount

Company Advantages
1. Waxing plummer block has been inspected. It has been tested by the third-party testing organization who provide medical euqipment testing and technical reports for CE marking.
2. It has the advantage of quick heat transfer capacity. The thermal interface material is applied to the base of the product so as to fill gaps and offer more dissipation paths for the heat.
3. The product is energy-efficient. It has the Energy Star label which is the mark of energy certification, which means that it will not consume too much energy.
4. The product has a large assortment of applications it is suitable for.
5. This product is widely used in various applications.

Spherical bearing with seat

Mounting Spherical Plain Bearings

To facilitate mounting, the ends of pins or shafts and the edges of housing bores for spherical plain bearings should have a lead chamfer of 10° to 20°.  The bearings can be more easily pressed into position and there is little risk of damage to the mating surfaces being caused by skewing of the bearing.

When mounting spherical plain bearings with a fractured or two-part outer ring, it is essential that the joint should be positioned at 90? to the main load direction; otherwise the service life will be shortened, particularly under heavy loads. Also, the bearing’s lubrication holes will be placed in the load zone, allowing lubricant distribution where it is needed most.

Bearing rings should NEVER be hammered into place. Only apply mounting forces onto the ring that is being mounted (i.e. force on outer ring if being pressed into a housing, force on inner ring if pressed onto a shaft). NEVER apply mounting forces though the bearing’s sliding surfaces, this will damage the bearing and will severely decrease its service life. In the event that the bearing has a press fit on both the inner and outer rings, a special tool should be made to allow pressing of both components simultaneously.

Other ways of mounting with the facilitation of heat or refrigeration, or with the use of adhesives may be possible also, please contact AST Engineering for further assistance.

Company Features
1. To be more competitive, Waxing has been offering the best service to customers.
2. Our development engineers contribute to promoting our business. Drawing from their years of experience, they work together to develop innovative products that keep up with the market trend.
3. Zhejiang waxing electromechanical co.LTD. adheres to the service concept and service mode of plummer block . Contact! We greatly welcome domestic and abroad customers for visit in Zhejiang waxing electromechanical co.LTD.. Contact! An essential tenet of Zhejiang waxing electromechanical co.LTD. is plummer block application . Contact!