Waxing cost-effective pillow block housing manufacturer at discount

Company Advantages
1. small pillow block bearings perfectly combines art and innovation.
2. The product is manufactured with high precision to meet the set industry quality standards.
3. This product has undergone rigorous quality checks before reaching to customers.
4. Zhejiang waxing electromechanical co.LTD. has strong technical strength and perfect sales network.
5. With years of experience accumulation in the production of small pillow block bearings , Zhejiang waxing electromechanical co.LTD. is highly recognized by global customers.

Spherical bearing with seat

Mounting Spherical Plain Bearings

To facilitate mounting, the ends of pins or shafts and the edges of housing bores for spherical plain bearings should have a lead chamfer of 10° to 20°.  The bearings can be more easily pressed into position and there is little risk of damage to the mating surfaces being caused by skewing of the bearing.

When mounting spherical plain bearings with a fractured or two-part outer ring, it is essential that the joint should be positioned at 90? to the main load direction; otherwise the service life will be shortened, particularly under heavy loads. Also, the bearing’s lubrication holes will be placed in the load zone, allowing lubricant distribution where it is needed most.

Bearing rings should NEVER be hammered into place. Only apply mounting forces onto the ring that is being mounted (i.e. force on outer ring if being pressed into a housing, force on inner ring if pressed onto a shaft). NEVER apply mounting forces though the bearing’s sliding surfaces, this will damage the bearing and will severely decrease its service life. In the event that the bearing has a press fit on both the inner and outer rings, a special tool should be made to allow pressing of both components simultaneously.

Other ways of mounting with the facilitation of heat or refrigeration, or with the use of adhesives may be possible also, please contact AST Engineering for further assistance.

Company Features
1. Over the past years, Zhejiang waxing electromechanical co.LTD. has been focusing on the development, production, and marketing of pillow block housing . We have been widely accepted in China.
2. Zhejiang waxing electromechanical co.LTD. has rich production experience and innovative thinking ability.
3. Zhejiang waxing electromechanical co.LTD. upholds the ideas of quality first, sustainable development and constant innovation. Contact! The existence of plummer block bearing sizes tenet leads Zhejiang waxing electromechanical co.LTD. since its establishment. Contact!