Using one-way bearing maintenance matters needing attention

Using one-way bearing maintenance note source: this website the author: the administrator to release time: 2018 - 08 - 16 10:25:05 views: 0 and maintenance matters needing attention of using one-way bearing is bearing a lot of machinery and equipment are used inside a accessories, because is very popular with the factory, so we should specify when to use must pay attention to the bearing for maintenance, so let's to simple know about the one-way bearing. Due to the different bearing will play when you were in the use of performance, so we need to know different bearing on mechanical equipment has what kind of role, then please follow the author learn about the use of one-way bearing and maintenance matters needing attention, hope you can like it. 1. In use should pay attention to the operation situation of the one-way bearing noise is found, the impact of power increases suddenly, it is necessary to stop the machine immediately to check, troubleshooting, must overhaul when necessary. 2. Under general conditions, a one-way bearing lubrication operating 60 hours each time, in the tropics, high humidity, dust, temperature changes under the condition of large area and continuous operation, should increase the lubrication frequency. Machine shut down for a long time before and after also need to add new grease. Note oil slowly turn the one-way bearing, the grease filling evenly. 3. Often examine case of seal are intact, such as find seal belt damaged should be replaced in a timely manner, if discover loss should be timely reset, tooth surface should be replaced periodically according to the working environment, grease using user should according to different working conditions, with a new grease. 4. Used to prevent the sun direct exposure of the one-way bearing. Forbid water scour one-way bearing directly to waterproof into the raceway, close to fight a hard objects or into gear meshing area. Through the above introduction, for us to believe that everyone should be maintenance considerations of the use of a one-way bearings have some understanding, in fact, no matter what equipment or parts when using the specified remember for maintenance, we need to remember to never directly with water to flush the bearing, this would be a big problem, can lead to equipment downtime phenomenon is even more serious, so we must pay attention to the specified in the maintenance of looking for regular maintenance personnel.