Rolling bearing is precision components, and its use should be measured accordingly.
No matter how high performance bearing use, if use undeserved, will not get the desired performance.
Use of bearing the note below.
One, keep the bearing and the surrounding environment clean even tiny dust into the bearing of invisible to the naked eye, also will increase the wear of bearings, vibration and noise.
Bearings and its surrounding accessories should be kept clean, especially the dust and dirt, tools and working environment must be clean.
Second, use the installation should be careful when not allowed powerful punch, are not allowed to use hammer, tap on a bearing directly, don't allow through the transfer roller pressure.
Three, using appropriate and accurate installation tools use a special tool, as far as possible to avoid use cloth class and short fiber, things like that.
Four, to prevent rusting of the bearings directly with the hand take bearing, to fully wash hands sweat, and again after coated with high quality mineral oils, especially in the rainy season and summer to pay attention to rust.
However, in some special operating conditions, bearing can get more than the life of the traditional computing, especially in the case of light load.
These special operating conditions is, when the rolling surface (
Track and rolling piece)
Can be separated by a lubricating oil film effectively and the surface of the limit of pollutants may cause damage.
In fact, under ideal conditions, the so-called permanent bearing life is possible.