Stainless steel oil mist lubrication of the bearing and circulating lubrication have to differ

Stainless steel bearing lubrication system of common oil mist lubrication and circulation lubrication, is for the two, many people may not clear, bearing today to introduce the next. Stainless steel bearing oil mist lubrication system to provide the oil of tiny particles suspended in the air at low speed and low pressure. Oil particles through the nozzle and contact with the high speed bearing parts make bearing bending soaked with oil. Oil mist system can be used in high performance bearing, because the device fever is smaller. Giving oil pressure system is more complicated than the oil mist lubrication system. In a typical system, the lubricating oil from the main tank to bearing, bearing from the small end of injection, use of bearing operation and automatic oil, slowly flowing from big end. Lubricating oil to improve sustainable and fixed flow, which could improve the ability of heat dissipation ability and self cleaning, cleaning can wear bearing pollutants and particles. Heat exchanger installed within the circulatory system, can let the oil temperature drop and increase the use time of lubricating oil. Also can install filters to clean up the cause of bearing wear particles. Lubricating oil system can be applied to high performance bearing, so in these cases, the heat dissipation and long oil life is very important. Should be used in high speed, injection pressure oil feeding system, installation of nozzle, spray oil directly into the bearing rolling element and cage and the space between the inner raceway. Flow to the big end in order to achieve a good heat dissipation effect.