Stainless steel bearing fixed method

Stainless steel bearing in the process of operation, want to play it, the performance of operation when installation, must be in strict accordance with the requirements, including for fixed stainless steel bearings after installation, it is very important, if there is no fixed good, especially some need and handstsnds use of machinery, easy to cause stainless steel bearing looseness, may cause mechanical failure. Usually, we can choose there are mainly six fixed way. Fixed a fixed shaft shoulder, shoulder is stainless steel bearing inner ring, relying on the shoulder and interference, so as to achieve axial fixation. This method is usually used in both ends fixed support structure, simple structure, small outer profile size. Second, the elastic ring fixed elastic ring fixed is to put the stainless steel bearing inner ring by the shoulder and lock nut for axial fixation, can absorb a certain amount of bidirectional axial load, axial structure size is smaller. Three fixed lock nut, lock nut fixed, fixed and flexible retaining ring is stainless steel bearing inner ring of the shoulder and lock nut for axial fixation, and add lock washer with, higher safety, this method is often used in some high speed, overload situations. Four, end thrust washer fixed end thrust washer to shoulder and shaft end ring for axial fixation, it is mainly used for shaft end should not be cutting thread, or a place smaller space. Five, the withdrawal of fixed this method is mainly used in some larger radial load, axial load and smaller double-row spherical bearing fixed. Withdrawal of the clamping way and the set set of similar, but with the use of special nut is more convenient in terms of loading and unloading. Six, set set fixed set set fixed mainly through the set set of inner hole of the radial dimensions and to make it be compressed and clamped on the shaft, thus do the stainless steel bearing inner ring axial fixation. Above is for stainless steel bearing briefly describes several methods of fixed, hope that through this introduction to everyone for stainless steel bearing fixed method have a better understanding, can also be applied in the production work.