Special high temperature bearing 970312 kiln car

High temperature kiln car bearing 970312 kiln car bearing, inner diameter of 60 mm, outside diameter of 130 mm, the width of the 31 mm. In the kiln car, drive system of the blast furnace or paint spraying equipment, bearing it is necessary to work in high temperature, or it is necessary to bear a great deal of difference in temperature, plain bearing is not applicable. High temperature bearing mainly by bearing material, the size of the structure, internal process, smooth and conditions for the optimization design of the four aspects, the greatest degree of satisfaction of various working condition requirements. High temperature deep groove ball bearing concrete is divided into five different series: 1, high temperature deep groove ball bearings, Ordinary) : can be satisfied with less than 300 ℃, DN value of about 100000 operating conditions. With stamping steel frame, with high quality import high temperature smooth white fat ( 4 ﹟ fat) Smooth, this kind of oil with polyether fluoride oil as base oil, high temperature resistance, oxidation resistance of PTFE as thickening agent, can be used to - 40 to + 300 ℃ temperature conditions. Bearings shall generally be stamping on both sides with a steel dust cover. According to the using condition, divided into C3 and C5 / C9 clearance. （ Cases of bearing method of code name: T6204 / C5; T6204 - 2 z / C5) 2, V type high temperature bearing high temperature deep groove ball bearings, full overloading right within 300 ℃, heavy load and low speed, ﹤100 r / min) The operation conditions. Without frame, full body, 1 load to take to adhere to the bearing. 4 times. Available in black smooth fat high temperature ( 1 ﹟ fat) Smooth, also can choose 3 ﹟ fat or 4 ﹟ fat fat is smooth. ( Cases of bearing method of code name: T6204V/C9; T6204V - 2Z/C9) 3, v-shaped ultra high temperature bearing full overload ultra high temperature deep groove ball bearing: appropriate within 500 ℃, heavy load and low speed, ﹤100 r / min) The operation conditions. Without frame, full body, 1 load to take to adhere to the bearing. 4 times. High temperature should use 1 ﹟ smooth smooth, the smooth agent at 200 ℃ above base oil with no residual volatile, constitute a solid and smooth. Generally run 2 months or so to see once, smooth and add the above high temperature grease and smooth. ( Cases of bearing method of code name: HT6204V/C9 HT6204V - 2Z/C9) , 4 G type ultra high temperature bearing high temperature graphite adhere to implement deep groove ball bearing: avoid, characterized by ultra high temperature, smooth, can be used to - 50 to + 500 ℃ temperature conditions. Bearing with graphite insist on frame, bearing and covered with manganese phosphate dust cover appearance, have antiseptic effect, and can improve the operation performance. Graphite stick to dividing ball, released during rotation of the graphite powder particles provide sufficient smooth bearing. Bearing is equipped with two dust cover, the axial lead frame, and avoid solid pollutants to enter. Another advantage of this kind of bearing, it is environmental protection performance is good. Even at the highest temperature, the gas sent out no risk. ( Cases of bearing method of code name: HT6204 / G/C9; HT6204 - 2Z/G/C9) 5, F1 type high temperature bearing high temperature deep groove ball bearing: entity adhere to frame is characterized by good adaptability, reliable operation. Particularly suitable high temperature and harsh conditions, the operation situation of high demand, of bearing operation reliability of even during rapid cooling can avoid bearing card to bite you. Bearing using special steel machining entities insist on frame, large internal clearance. ( Cases of bearing method of code name: T6204 / F1 / C9; T6204 - 2Z/F1/C9） The previous: high temperature bearing corrosion against the next: what material is the characteristics of high temperature resistant bearing the engine?