Smooth oil selected the fundamental criterion

Equipment to clarify smooth standards about the rules in the book is the basis of equipment to choose oil, without clarifying the rules of a book or, use of equipment units I choose. Choosing products should comply with the following criterion: a. Speed: the higher the speed of the more easy to form oil wedge, can choose the smooth oil of low viscosity to ensure the existence of the oil film. Choose stick through the high, are produced by the impedance of the large, high calorific value, wen will incur more through. Low speed, on viscosity of oil bearing load, smooth should choose high viscosity oil. b。 Bearing load, the greater the average load with smooth oil viscosity is higher. Should be thinking of low speed and heavy loading oil allow bearing ability. c。 Working temperature: the temperature change is big, should choose high viscosity index of oil, high temperature under the working conditions should be chosen with high viscosity and flash point, oily and oxidation stability is good, have corresponding oil additives. Under the condition of low temperature work should choose water with low viscosity, low solidifying point of less resistance to low temperature of the oil. d。 Working environment: wet environment and environment of the aerosol should choose strong demulsibility, oily and good anti-rust oil, dust in the larger environment should pay attention to dust seal. Corrosive gas environment should choose a product with good corrosion resistance. (4) the smooth work of the 'five' 'three filtering equipment smooth work' 'five set' filter 'three' is the smooth daily technical management standardization, standardization, guarantee the effective way to do a good job of the equipment is smooth. Its content is: five: a. Fixed: sure smooth parts of each device and smooth. Designated for oil. b。 Qualitative: sure equipment smooth parts needed for the oil type, brand and quality request, the oil quality must be qualified after test. c。 Quantitative: sure every time the amount of fuel oil change to oil parts, the fuel consumption quota management and quantitative oil change. d。 On a regular basis: the smooth part must add oil change cycle, according to the rules of cycle oil, add oil, and cleaning oil change, for a large quantity of oil storage tank, according to the rules in the cycle of sampling test, must to sample and oil change time next time. e. Person: sure operator and maintenance worker, smooth workers to equipment parts go smooth, add oil and cleaning oil change of division of labor, individual and common smooth and complete equipment. Three filters: a. Warehousing filtering: the oil by the filtering of transportation warehousing storage. b。 Distributed filtering: oil distribution into smooth filtering container. c。 Oil filter, oil filter when they take oil storage areas. (5) equipment smooth should possess good conditions: a. Everything is smooth installation, such as nozzle, oil cup, oil, oil pump and pipeline system, clean and nice, smooth; b。 Everything smooth smooth area, click the run chart of 'five' request, offset the lack of oil dry milling phenomenon; c。 Velvet, felt complete clean oil, placed correctly; d。 Oil and coolant metamorphosis, mixed, with the request; e. Sliding and rotation, and other important parts clean, thin oil film layer; f。 The different parts are not leak.