SKF non-standard bearing lubrication of anomaly ruled out the important role of knowledge - bearing

Generally, non-standard bearings will heat up, since we started running in over a period of time, namely at a lower temperature ( Usually higher than the room temperature 10 ~ 40 degrees) In the norm. To the normal time, depending on the SKF bearing size, form, method of rotation speed, lubrication, non-standard bearing conditions around the change and different, generally it takes 20 minutes to several hours at this time. Non-standard bearing temperature warms up do not meet the normal and abnormal, can consider to the following reasons, moreover should stop and take the necessary measures as soon as possible. Temperature of non-standard bearing the appropriate life and prevent oil degradation is crucial, advice: try to control in the high temperature condition ( Is 100 degrees commonly the following) Use the most ideal. The main reason of abnormal temperature rise of lubricating oil too much or too little. The installation of SKF bearing. Non-standard bearing internal clearance is too small, or too much load. Seal friction is too large. Lubricant. Cooperate with the creep. 1, the first is the part of SKF bearing lubrication, reducing bearing friction and wear; 2, make the bearing rolling contact surface is often appropriate oil film formation, extend the non-standard bearing fatigue life; 3, through lubrication away bearing interior because of the heat generated by the friction or other reasons; 4, through lubrication for non-standard bearings, reach the role of rust and dust. Therefore, we should correctly realize the importance of lubrication for SKF bearing, improve the performance of bearing, reduce the consumption.