SKF bearing requires the principle of the inner packing methods

1) miniature bearing: every 10 ~ 15 sets of bearings in a plastic tube, every 5 ~ 10 plastic tube into a carton, Or bag, bag) 。 (2) the medium and small bearings: many sets of bearings with polyethylene film, external use kraft paper or polyethylene composite paper roll package; Several sets of bearings in a plastic tube ( Box) ; A single set of bearing with polyethylene film bag packing, folding or sealing mouth and then into a carton. (3) a large bearing: single set packing with polyethylene film or polyethylene composite paper, then in a carton; With polyethylene film bag, single set packing after folding mouth, then in a carton; Single set into the special plastic boxes; Single set of three layer bound up packing: the inner or compound with polyethylene film tape, middle-level with fastening belt, outer with waterproof osmotic plastic belt. (4) oversize bearings: a single set of three layer bound up packaging ( Same as above) ; Four multiplied by single layer bound up packing: in the above three layers bound up after packaging, the outermost bound up a layer of linen cloth belt. To a diameter of 150 mm or more separable type of tapered roller bearings, inside and outside in front of the packaging components should be liner polyethylene film before, or internal and external components individually packaged separately. To a diameter of 150 mm or more interchangeable cylindrical roller bearing, due to the easily upon complete packaging, generally can be used both inside and outside component individually packaged separately.