SKF bearing early failure rate and maintenance process

SKF bearing failure ratio factors: early smooth improper: 36% of bearing early failure reason. Measured in domestic problems will be bigger, will account for 40 - 50%. Excessive problems including lack of smooth, smooth, smooth agent into smooth distance of impurity, improper and so on. Pollution: accounted for 14% of bearing early failure reason, main seal failure problem, man-made pollution and operating environment smudgy, etc. Tired, accounted for 34% of bearing early failure reason. SKF bearing maintenance process: SKF bearing hosting environment: SKF bearing maintenance can remove how to distinguish the bearing can apply, China bearing network on the basis of using the understanding of SKF bearing summed up the following: 1, the inspection, bearing a is removed before it hasn't been cleaned in the net, don't say it could also use again, treat it as new. 2, the heart is not to turn a dirty bearing, can rotate when cleaning. Cleaning solvents should use petroleum base, to the net and lint-free cloth or can be used to clean and austerity without water empty I. 3, heart cleaning process should be careful, washing agent has damage to the skin, and try to wear gloves and protective goggles maintenance. 4, check the bearing, with a small mirror and similar dental probe to check bearing raceway, adhere to the frame and roller check, pay special attention to scratches, marks, cracks, color change, see if I can persist in have looks like mirror and so on. 5, toggle bearings, listening to the sound of it. An undamaged bearing, no scar and no other defects, clearance is not too large, operation is stable, it can put bearing in the back. 6, to avoid the corrosion attack, immediately after cleaning bearing to be smooth.