Separation bearing bad how to do separation was introduced the cause of the bearing is broken

Car after using longer would be easy to attack all kinds of problems, one of these problems is the separation bearing to fail, and the performance of the separation bearing broken many owners are not found, small make up just to give you introduced several kinds of separation the performance of the bearing is broken and reason, everyone together and see it. Introduced the cause of the bearing is broken: separation phenomenon gap normal voice, trample clutch have a rustling sound, with a driving gear at a voice of sibilance similar metal friction. Does not affect the normal driving, but found a voice. Separation was introduced the cause of the bearing is broken: (care 1) In accordance with the operating rules, prevent the clutch half joint and separation condition, reduce the clutch is used. ( 2) Pay attention to enjoy, or the inspection maintenance regularly, care to bearing separation and eliminate impurities, in cooking process make smooth oil seepage, enabling it to allow the smooth agent of points. ( 3) Refer to the deep level the separation of the clutch lever, to guarantee the return spring of elastic fit the rules. ( 4) Rinse the whole journey, make it fit the request ( 35 - - 45毫米) 。 Avoid trip is too big or too small. ( 5) To minimize the joint, departure times, reduce the impact load. ( 6) Joint and separation. ( 7) If the separation bearing wear or burn out, change a new initiative, energetic smooth before device.