Self-aligning roller bearing temperature causes and treatment methods

When the bearing temperature, first of all determine whether false action, such as really rise, should do the following: 1, the bearing installation position is not correct, will cause a larger ball end face and TIMKEN bearing inner race and the outer race against Taiwan axial force, bearing caused by overheating. 2, the use of bearing had better choose the accuracy grade of TIMKEN bearings. 3, the use of bending bearing spindle or different heart fever caused by body hole repair solution is 4, bearing spindle belt too tight to cause fever solution is make the elastic of the belt can be adjusted properly. 5, fever caused by poor lubrication of the solution is to use the provisions, brand of lubricating materials and proper cleaning. 6, assembly quality low fever caused by the solution is to improve the quality of assembly. 7, in the rolling bearing shell run laps cause fever solution is to replace the TIMKEN bearing and wear parts related correcting impeller balance hole diameter and checking static balance value 8, axial force is too large to cause fever solution is cleaning, adjusting seal mouth ring clearance requirement 9, rolling bearing damage caused by bearing heating solution is replaced. When we are in the use of spherical roller bearing, if it is found that the temperature is very high, is to stop the equipment running, and find out its reason, and provide solution for processing according to the above, but may be due to the reason of bearing heating is different, so the solution is also different, so still have to treat, particular case is particular completed with the help of the technical staff.