One-way needle bearing noise is how to maintain

One-way needle bearing metallurgical quality problem is likely to lead to needle roller bearing is easy to failure at early stage, so the metallurgy technology for needle roller bearing is very important. If you want to improve the quality of the one-way needle roller bearing products must improve the metallurgical technology. Tear open come down to the deep groove ball one-way needle bearing cleaning, rough washing and fine washing, respectively in the container, put a metal mesh bottom first, make a one-way needle roller bearing is not direct contact with dirt from the container. Improve on the quality of raw materials, to the quality of the needle roller bearing is very important, while the quality of the raw materials of proportion of needle bearing failure and falling, but can not be ignored, it is the important factor leading to the invalid needle roller bearing. One-way needle roller bearing vibration influence on one-way needle bearing failure is very significant, if you have any problem such as peeling, indentation one-way bearings, vibration can see these problems. Therefore, when preventive maintenance and needle roller bearing, be sure to check the needle roller bearing. In this way can we better to increase its use life, avoid needle roller bearing in early failure.