Maintain the set-contained general steps of the spherical bearing

1) The location tracking TIMKEN bearing in rolling mill and recorded. Timken can provide customers with insert ball bearing unit remaining service record card, can be used to record bearing seat number and roll number, frame, the position of bearing in rolling mill, tonnage and bearing outer ring bearing zone and rolling products such as hours worked data. Record card should be updated and lunch maintenance personnel to check in, at the bottom of the bearing measurement data recorded in the margin to and other detailed content; 2) Removed from the roll bearing seat, unload bearings from the bearing seat. Whether it is removed from the bearing seat bearing or stop bearing inspection needs special hoisting ways and tools, timken can provide customers with assembly tools and special assembly way initiative; 3) Wash the TIMKEN bearings. In the process of cleaning bearing should be removed from all peel, water, smooth agent as well as any other form of residual bearing severe wear of dirt. Cleaning bearing the cleaning method and cleaning agent used is based on the number of bearings to clean bearing size or resolution, or a few small bearing bearings available kerosene, mineral oil or other commercial solvents. About the large bearing or bearing in great quantities, available at 40 ℃ to 22 CST (viscosity Or 100 ° F to 100 SUS) The neutral oil in cleaning tank cleaning. 4) Check the TIMKEN bearings, including appearance inspection and repairs. On the surface of the inner ring that can tear down roller surface or roller on the surface, if discover presents small spalling or skin cracks, usually with grinding machine will flake metal surface edge grinding and polishing flake. 5) Should regularly check the bearing wear, can through the measurement of bearing clearance to evaluate bearing wear and tear; 6) According to the requirements, check and maintenance bearing; 7) Keep bearing bearing seat back; 8) According to the requirements, check and maintenance roll neck; 9) With bearing bearing device on the roll.