KOYO one-way bearing temperature affect service life

In general, the service life of the one-way bearing has relationship with three factors, one is KOYO bearing itself quality, 2 it is to use the environment. Three is to install method. 1, while the new process USES a whole cage, cage is better than two body and an organic whole, it is only saves material, and performance than the difference between the two bodies such as the rotary. 2, through the surface feel light should be on the surface of the one-way bearing is a kind of raven, of the cause of the raven is used by KOYO bearing steel is up to standard and its cutting fluid used in the grinding process and etc, produced by the two before. So in the process of the one-way bearing a lot of clients say as long as the quality of bearing surface brightness is good, this is wrong. 3, chamfering is shining a one-way bearing chamfer does not decide the quality of the bearing, but it reflects the bearing processing method. Chamfering is black, the heat treatment such as quenching, so increase the hardness of bearing, and some people think the chamfering is black not good-looking is not process completely, this is also a myth. Vibration of KOYO bearing damage is quite sensitive, peeling, indentation, rust, crack and wear will be reflected in the bearing vibration measuring. So, through the use of special bearing vibration tester ( Frequency analyzer, etc. ) Can measure the size of the vibration, through frequency points cannot deduce the abnormal situation. Measured values of bearing or sensor installation position and different using conditions, thus requiring prior to each machine is analyzed by the measured value of the determined after judgment standard. So the continuity of bearing temperature monitoring is necessary, whether measured bearing itself or other important parts. If it is on the basis of the operating conditions, the temperature change of any fault has occurred. KOYO bearing temperature measured on a regular basis can use thermometer, digital thermometer, for example, can accurate bearing temperature measurement and display by ℃ or Fahrenheit units. The importance of bearing, means that when the damage cause of equipment downtime, so this type of bearings shall be equipped with best temperature probe.